3.175mm 1/8" Plastic Nylon Balls
video

3.175mm 1/8" Plastic Nylon Balls

3.175mm 1/8" Plastic Nylon Balls:· Extremely good wear resistance High impact resistance· High tensile strength and modulus of elasticity.· High heat distortion temperature· Wear, Abrasion Vibration Resistance· Resistance to a wide variety of chemicals, dilute acids or oxidizing agents.· Lightweight Economical
ارسال درخواست
معرفی محصول

معرفی تولید

Bell Ball mainly produce 3mm plastic balls material: POM PP Nylon, Acrylic, ABS, HDPE, PTFE etc. 


Delrin Ball .jpg

توپ های پلاستیکی استال POM (Delrin)

چگالی: 1.4-1.41g/cm3

درجه:G{{0}}G3(0.01-0.05mm)

Feature: Delrin (PolyoxyMethylene), also known as Acetal, Polyacetal, and POM,similar to nylon slightly, harder larger density

low water absorption,the most hard and wear resistant materials.Applications:POM ball table,drawer slide device bearings, rollers, valves, electronic apparatus, sailing apparatus. 


Polypropylene PP plastic ball 

چگالی: حدود 0.88 گرم بر سانتی متر مکعب

درجه:G{{0}}G3(0.01-0.05mm)
ویژگی: مقاومت خوب و مقاومت شیمیایی،
چگالی کمتر از آب، بالاترین نقطه ذوب

کاربردها: در شیرهای چک، شیرهای کمکی، شیرهای شناور و انتقال خون، نشانگر کالیبراسیون سطح استفاده می شود. آنها همچنین برای بسیاری از سازندگان به عنوان بلبرینگ بار سبک به خوبی کار می کنند.

polypropylene plastic ball.jpg
6.35mm nylon balls .jpg

توپ پلاستیکی نایلون PA66

نایلون 6/6 دارای استحکام بالا (به ویژه در دماهای بالا)، چقرمگی در دماهای پایین، سفتی، مقاومت در برابر سایش و سایش، ضریب اصطکاک کم و مقاومت شیمیایی خوب است. همه نایلون ها رطوبت را جذب می کنند. این باعث افزایش انعطاف پذیری و مقاومت در برابر ضربه می شود. برای کاربردهای ضربه ای زیاد که به استحکام و استحکام نیاز دارند استفاده کنید.

 

PTFE plastic balls 

چگالی: حدود 2.2 گرم در سانتی متر مکعب
درجه:G{{0}}G3(0.01-0.05mm)

ویژگی: پایداری شیمیایی عالی، مقاومت در برابر خوردگی، آب بندی، روانکاری بالا، غیر چسبندگی-، دارای مواد عایق الکتریکی

استفاده: مایعات و اسیدهای برودتی تحت شرایط ابزار.
ptfe teflon ball 19mm.jpg


نام محصول

توپ های پلاستیکی نایلونی (پلی آمید).

Material 

نایلون 6/ نایلون 6.6 (PA 6/PA 6.6)

اندازه

1.5mm-50mm

Grade 

G{0}}G3 (0.01-0.05mm)

تراکم

حدود: 1.1 گرم بر سانتی متر مکعب

ویژگی

Semicrystalline thermoplastic Nylon 6/Nylon 6.6 polymer balls, they provide low weight, high corrosion, wear and abrasion resistance. They are auto lubricant and with good ductility, toughness and electric insulating properties. Useful even for high temperature applications. Nylon balls are insolvable into diluted mineral acids and in most organic acids. They are resisting to alkalis, petroleum products, greases, inorganic salt solutions, low gradation alcohols, motor oil, transmission fluids, methanol, ketones, esters. They do not resist to strong acids and basis.

Application 

شیرهای ویژه، بلبرینگ های کم بار، دبی سنج، سوئیچ ها، دستگیره ها، کاربردهای پزشکی و صنعتی.

نایلون یک عنوان عمومی برای گروهی از پلیمرهای مصنوعی است که به طور کلی به عنوان پلی آمید شناخته می شوند، نایلون جامد برای قطعات مکانیکی مانند پیچ ​​ماشین، چرخ دنده و سایر اجزای{0}} تا متوسط-که قبلاً در فلز ریخته شده اند استفاده می شود. . نایلون درجه مهندسی- با اکستروژن، ریخته‌گری و قالب‌گیری تزریقی توسعه می‌یابد. نوع 6، 6 نایلون 101 رایج ترین گرید تجاری نایلون و نایلون 6 رایج ترین گرید تجاری نایلون قالبی است.

 

Nylon Balls are used in a variety of bearing, and seal applications. These balls are precision ground for tight tolerance are made of solid, high-quality thermoplastic. Nylon PA66 offers high strength (especially at elevated temperatures), toughness at low temperatures, stiffness, wear and abrasion resistance, low coefficient of friction and good chemical resistance. All Nylons absorb moisture; this increases flexibility and impact resistance. Use for high impact application requiring strength and rigidity. UV light results in degradation over time. Resists hydrocarbons, aromatics, aliphatic solvents, automotive oils and fuels, and refrigerants. Attacked by strong acids, bases, and phenol. Gradually attacked by hot water. Lightweight -- approximately 1/8 the weight of bronze, 1/7 the weight of cast iron, and 1/2 the weight of aluminum -- which reduces both the inertial and static loads and eases the handling of large components during maintenance or replacement procedures.

Color: Natural (yellow-cream color) 

mulit color plastic balls

Plastic Ball for slider


بسته: 

Package of the plastic resin balls


FAQ: 


What is weight of the 3.175mm 1/8" Plastic Nylon Balls?

0.019g/pc 


تفاوت بین بل بال و سایر تامین کنندگان چیست؟

حرفه ای و قابل اعتماد است. نقاط قوت ما فناوری های متعدد موجود، تضمین کیفیت قوی و مدیریت پروژه و زنجیره تامین خوب است.


چه گواهینامه ای داریم؟

برای توپ های پلاستیکی نایلون، گواهینامه مواد خام، Reach و گزارش ISO را داریم


مشخصات گلوله های نایلونی چیست؟

 نایلون (PA, PA66) دارای یک سری خواص عالی مانند استحکام مکانیکی بالا، مقاومت شیمیایی، مقاومت در برابر روغن، مقاومت در برابر سایش، خود{1}}روغنکاری، پردازش آسان و قالب‌گیری است و به یکی از مهندسی ترموپلاستیک پرکاربرد تبدیل شده است. پلاستیک ها


توپ های زنگ به گرمی از درخواست شما استقبال می کنند!




تگ های محبوب: 3.175mm 1/8" plastic nylon balls, China, manufacturers, suppliers, factory, wholesale, cheap

ارسال درخواست

whatsapp

skype

ایمیل

پرس و جو